What Are the Best Practices for Using Chlorine Granules in Your Pool

What Are the Best Practices for Using Chlorine Granules in Your Pool

For effective pool sanitation, dissolve granules in water, distribute with a skimmer, apply in the evening, store properly, and enhance with weekly shock treatments.

The Science of Chlorine Dosing: When and How

It is essential to understand the financial concept of the science of chlorine dosing as chlorine is usually a swimming pool’s disinfectant. If not dosed well, the swimming pool water may not be clean, exposing users to various diseases and infections.

The indications for dosage of chlorine in pool water

Several signs convince someone that they can add chlorine to their pools. First, you should take a pool test kit to measure the chlorine level in the water. However, the recommended level is set at 1-3 parts per million. Second, you should measure the PH of the water. The PH should be set at 7.2 and 7.6. Notably, chlorine works best at this level.

The timing and frequency of the treatment of chlorine

For the maintenance of the pool, chlorine should be used regularly. At least daily or after a few days, a dose of chlorine should be added to the pool. However, the regular addition of chlorine depends on interruptions made in the pool water and the test results. You should perform the shock treatment at least once a week.

The form of chlorine that will be the best

There are two forms of the o available, including tablets, powder, and liquid. Chlorine tablets and powder are usually added whenever one needs to do consistent sanitation to the pool. Liquid should be used when doing shock treatment to the pool.

The following formula will give you a better measure of the quantity of chlorine you need depending on the present chlorine level: [(desired ppm – present ppm) \times volume of water to be treated] / 1,000,000 = lbs of chlorine needed.

Several factors can influence how much chlorine you dose

If you have a high bather load in the pool or direct sunlight on the water, you will need to add more chlorine. On the other hand, organic contaminants would consume the chlorine and necessitate another dose. Follow the manufacturer’s guidelines for your particular chlorine product. Otherwise, dose the pool between 1 and 3 ppm, depending on how long ago you treated the pool with chlorine. Shock treatment using sodium hypochlorite would be between 5-10 ppm.

In general, you cannot overdose your pool with too much chlorine

However, if you underdose the pool, it will not be fully sanitized. To achieve optimal pool health and sanitation, dose as frequently and as closely as recommended, and check the pool often to keep informed. Also, overchlorination will cause your water to become cloudy and can also damage the pool equipment.

Strategic application of chlorine is vital to an optimal pool environment

Always dissolve your chlorine tablets or granules in a bucket of water before adding them to the pool, this will allow them to disperse evenly. You can then use the pool brush scooper to spread the water around the sides of the pool. Avoid applying chlorine to the pool when people will be swimming shortly because it will rapidly absorb but apply it during off-peak hours. Tablets or granules are often a more efficient way of dosing your pool. They dissolve at a slower rate than shock-type chlorine, so you will need to dose less sensitive frequent and adjust your pool’s chlorine level. Using a pool brush in the sides and floor of the pool will disperse the chlorine throughout the pool. You can as well use a pool feeder or floater to automate the job of even chlorine distribution.

Role of chlorine feeders and floaters

Chlorine feeders and floaters are devices that help to release chlorine into the pool continuously. You can program them to release a certain amount of chlorine at regular intervals.

Maintaining Your Pool’s Health with Chlorine

Maintaining a healthy pool comes with routine and vigilance. Test your pool water every week and add or adjust chlorine. Shock your pool in case of heavy usage or when chlorine levels fall below 1 ppm.

Weekly chlorine shock: necessity and procedure

A weekly chlorine shock is necessary to combat the buildup of combined chlorine and other contaminants. Follow your chosen shock product’s instructions and make sure to circulate the pool water for at least two hours after treatment to achieve an even distribution of the chemicals.

Regular testing and adjusting of chlorine levels

Checking pool water every week is vital when it comes to chlorine maintaining. Get yourself a trustworthy testing kit to check your pool’s chlorine, pH, and other significant factors. Add or adjust chlorines whenever necessary to keep your pool clean.

Safe and Effective Actions of a Pool Owner

Understanding chlorine’s relationship with CYA

Cyanuric acid, commonly reconciled as CYA, is a chlorine stabilizer, protecting it from the sun’s UV rays. The ideal CYA level parameter is considered from 30-50, as it stabilizes chlorine without causing overstabilization which may produce cacophonous results.

Making the Right Chlorine Choices for Your Pool

In order to choose the right chlorine for your pool, you need to either take consideration of your pools’ size, how it is being used and the local conditions, or take the advises mentioned below. Using permitted chemicals to treat pools is also viable. Stabilized chlorine is also recommended for outdoor pools, whereas in case of indoor use, cover pools, it is advised to use non-stabilized chlorine.

Liquid chlorine is highly effective and fast acting

It is the sole appropriate chemical for shock treatments. It is also easy to measure. Tablet chlorine, on the other hand, provides a slow release of chlorine over time, which makes it ideal for slowly maintaining the necessary levels of sanitizer in your pool.

Overstabilization in the swimming pool occurs when there are more than 100 ppm of cyanuric acid in the water

When the CYA level is high, chlorine is inhibited and no longer effective in sanitizing the pool. If the pool is overstabilisation, use a CYA reducer, or the second method is to drain about a third of your pool and refill with fresh water.

The best way to keep your swimming pool clean and safe

Get a test kit and measure your pool pH, alkalinity, and water whiteness regularly. If your ph and chlorine levels are low add extra chlorine and pH, and to shock regularly or after a large pool swim. Keep your pool equipment clean. To insure proper distribution of chlorine, you should use a pool brush, skimmer or circulation system. Shock your pool if it has not been used recently or the chlorine drops down to less than 3ppm.

See all articles in Pool Chlorine Tablets Blog